Free hiring metrics calculator 2026. Time to fill vs time to hire by stage, cost of vacancy, offer acceptance and applicants per hire; recruiting ROI and cost per retained hire by source; cost of employee turnover from separation, vacancy, recruiting, onboarding and ramp-up; training cost per employee, per hour and training ROI.
Time to fill and funnel: enter the average days a filled role spent in each stage (approval to posting, sourcing, screening, interviews, offer to acceptance, notice), the number of open roles, the salary and how costly an empty seat is relative to pay. You get time to fill, time to hire and days until the seat is occupied, the slowest stage, vacancy cost per role and in total, and what each day saved is worth. Add funnel counts to see pass-through rates, offer acceptance, applicants and interviews per hire.
Source ROI: list each recruiting source with its external spend, hires and the share still employed after a year, plus your internal recruiting cost and the first-year value of a hire who stays. You get cost per hire and cost per retained hire for every source, with the best and costliest flagged, and overall ROI and payback.
Cost of turnover: enter headcount, annual turnover and average salary, then the cost of replacing one leaver: separation, days vacant, recruiting, onboarding and the ramp to full productivity. You get cost per leaver as a share of salary, the annual total, each component's share, and the saving from a lower turnover rate.
Training cost: enter participants, hours, the loaded hourly cost of their time and the program costs. You get total cost including participant time, cost per participant and per hour, the share of payroll, and ROI and payback if you enter the benefit you attribute to it.
Links from the old time to hire, time to fill, recruiting ROI, cost of turnover, replacement cost and training cost calculators open the matching tab; each tab keeps its own history.
Hiring metrics answer four questions in sequence: how long does it take to put someone in the seat, which sources produce people who stay, what does it cost when they leave, and what does it cost to make them productive. Time to fill and time to hire are different clocks — one starts when the requisition is approved, the other when the eventual hire appears — and the gap between them shows whether the delay is in finding candidates or in processing them. Source ROI replaces cost per hire, which rewards cheap sources, with cost per retained hire, which rewards sources whose people are still there a year later. Cost of turnover adds up the components instead of applying a blanket percentage of salary, so the largest line is visible. Training cost includes the time participants spend away from their work, which is usually a third or more of the true total.
Stages approval to posting 5, sourcing 12, screening 7, interviews 14, offer to acceptance 6, notice period 14. Time to fill = 5 + 12 + 7 + 14 + 6 = 44; time to hire = 7 + 14 + 6 = 27; seat occupied after 58 days. Slowest controllable stage: interviews.
$85,000 ÷ 365 × 1.5 = $349 a day; × 58 days = $20,260 per role; × 4 = $81,041. Interviews in 7 days instead of 14: $71,260, saving $9,781.
applicants 240 → passed screening 48 (20%) → interviewed 16 (33%) → offers made 5 (31%) → offers accepted 4 (80%). Offer acceptance 80%; 60 applicants and 4 interviews per hire; selection rate 1.67%.
Employee referrals: $12,000 + $24,000 internal = $36,000 for 8 hires ($4,500 each), 7.2 retained, $5,000 per retained hire; Job boards: $30,000 + $36,000 internal = $66,000 for 12 hires ($5,500 each), 8.4 retained, $7,857 per retained hire; Agency: $75,000 + $15,000 internal = $90,000 for 5 hires ($18,000 each), 4 retained, $22,500 per retained hire; Outbound sourcing: $24,000 + $15,000 internal = $39,000 for 5 hires ($7,800 each), 3.75 retained, $10,400 per retained hire. Overall $231,000 ÷ 30 = $7,700 per hire; ROI 506%.
Per leaver $2,500 + $4,007 + $4,700 + $3,500 + $13,542 = $28,249 (43% of $65,000). 200 × 18% = 36 leavers → $1,016,947 a year. At 15%: 6 fewer leavers, $169,491 saved.
Time 50 × 8 × $38 = $15,200; development $15,000; delivery $8,000; facility $1,500; materials 50 × $60 = $3,000. Total $42,700: $854 per person, $106.75 per hour. Benefit $90,000 → ROI 111%, payback 5.7 months.
| Stage | Days | Share of total | Counted in time to fill | Counted in time to hire |
|---|---|---|---|---|
| Approval to posting | 5 | 9% | Yes | No |
| Sourcing | 12 | 21% | Yes | No |
| Screening | 7 | 12% | Yes | Yes |
| Interviews | 14 | 24% | Yes | Yes |
| Offer to acceptance | 6 | 10% | Yes | Yes |
| Notice period | 14 | 24% | No | No |
| Total | 58 | 100% | 44 days | 27 days |
At $85,000 and a 1.5× vacancy multiplier an empty seat costs $349 a day: $20,260 per role over 58 days, $81,041 across 4 open roles. Each day cut from the process is worth $1,397.
| Source | External spend | Total cost | Hires | Cost per hire | 1-year retention | Cost per retained hire | ROI |
|---|---|---|---|---|---|---|---|
| Employee referrals | $12,000 | $36,000 | 8 | $4,500 | 90% | $5,000 | 1100% |
| Job boards | $30,000 | $66,000 | 12 | $5,500 | 70% | $7,857 | 664% |
| Outbound sourcing | $24,000 | $39,000 | 5 | $7,800 | 75% | $10,400 | 477% |
| Agency | $75,000 | $90,000 | 5 | $18,000 | 80% | $22,500 | 167% |
| All sources | $141,000 | $231,000 | 30 | $7,700 | 78% | $9,893 | 506% |
ROI uses a first-year value of $60,000 per hire who stays; it is an estimate, so read the percentages as a ranking. The average cost per retained hire of $9,893 is repaid in about 2 months of that value.
| Component | How it is calculated | Amount | Share |
|---|---|---|---|
| Separation | Exit admin and accrued-leave payout | $2,500 | 9% |
| Vacancy | $65,000 ÷ 365 × 45 days × 50% | $4,007 | 14% |
| Recruiting | Cost per hire | $4,700 | 17% |
| Onboarding and training | Equipment, induction, formal training | $3,500 | 12% |
| Ramp-up productivity | $65,000 ÷ 12 × 5 months × 50% shortfall | $13,542 | 48% |
| Total per leaver | 43% of salary | $28,249 | 100% |
200 employees at 18% turnover lose 36 people a year: $1,016,947, or $5,085 for every employee on the payroll. Cutting turnover by 3 points avoids 6 departures and $169,491.
Time to fill starts when the requisition is approved and stops when an offer is accepted: 5 days to post the job, 12 until the eventual hire applied, 7 of screening, 14 of interviews and 6 from offer to acceptance, 44 days in the example. Time to hire starts when that candidate entered the pipeline, so it leaves out the first two stages: 27 days. The difference, 17 days, is time spent before the right person was even in the process, which is a sourcing and planning problem rather than a speed problem. A long time to hire with a short gap points the other way, at scheduling and decision-making; here the slowest stage is interviews at 24% of the total.
The seat stays empty until the new hire starts, so the cost of vacancy runs for time to fill plus notice: 58 days. Valuing an empty day at 1.5 times daily pay ($349) makes each open role cost $20,260 and the 4 open roles $81,041. Halving the interview stage to 7 days brings time to fill to 37 days and saves $9,781 across those roles. The multiplier is a judgment: revenue-generating and bottleneck roles justify two or three times pay, back-office roles covered by colleagues closer to one.
The funnel shows where candidates fall out. Of 240 applicants, 48 passed screening (20%), 16 were interviewed, 5 received offers and 4 accepted: an offer acceptance rate of 80%, 60 applicants and 4 interviews per hire. A low acceptance rate usually means pay or process length; a very low screening pass rate means the advert is attracting the wrong applicants.
Cost per hire flatters whichever source is cheapest per head. The example spends $141,000 externally and $90,000 on recruiters and tools to make 30 hires, $7,700 each once internal cost is spread by hires. Job boards look efficient at $5,500 per hire, but only 70% of those hires are still there after a year, so each retained hire really cost $7,857. Employee referrals cost $4,500 per hire and $5,000 per retained hire because 90% stay; the agency is $22,500 per retained hire, 4.5 times as much.
ROI puts a value on the result. With each hire who stays worth $60,000 in their first year, the 23.35 retained hires return $1,401,000 against $231,000 of cost: 506% ROI, repaid in about 2 months. The value figure is an estimate and the percentage is only as good as it is, so use ROI to rank sources and to decide where the next dollar goes rather than as a headline. An expensive source can still be the right one for roles nothing else fills; the point of the table is to make that a decision instead of a habit.
Blanket rules such as "replacing someone costs half to twice their salary" span a fourfold range because the answer depends on the role. Adding the parts for a $65,000 employee gives $28,249, 43% of salary: separation $2,500, vacancy $4,007, recruiting $4,700, onboarding and training $3,500, ramp-up productivity $13,542. The ramp to full productivity is 48% of the total and appears on no invoice: 5 months at an average of 50% productivity is $13,542 of pay for output not yet delivered. For a $140,000 specialist with an agency fee, a longer vacancy and an 8-month ramp the same arithmetic gives $113,516, 81% of salary.
Multiplied through the workforce the figure becomes a budget line. 200 employees at 18% turnover means 36 leavers and $1,016,947 a year, $5,085 per employee whether they leave or not. That is the number to set against retention spending: a 3-point reduction to 15% avoids 6 departures and saves $169,491, so a program costing less than that pays for itself in the first year. BLS JOLTS publishes monthly quits and separations rates by industry for comparison; your own trailing-twelve-month rate is the one to plan on.
The example 8-hour program for 50 people shows up on invoices as $27,500: $15,000 to develop or license the content, $8,000 for the trainer, $1,500 for the room and $60 of materials each. The 400 hours the participants spend away from their work cost another $15,200 at a loaded $38 an hour, 36% of the true total of $42,700. That is $854 per participant and $106.75 per training hour, 1.09% of a $3,900,000 payroll.
Whether it was worth it depends on the benefit, which has to be estimated honestly: errors avoided, hours saved, leavers retained. At $90,000 a year the program returns 111% in the first year and pays back in 5.7 months; at $30,000 it loses 30% in year one and takes 17.1 months to recover. Break-even needs $854 of annual benefit per participant. Development cost is one-off, so running the same program for a second group costs only delivery, materials and time, which is why reusable content has a much better return than a single session suggests.
Find answers to the most common questions about hiring metrics calculator.
Time to fill counts days from requisition approval to offer acceptance, so it includes how long the job waited to be posted and how long it took for the right candidate to appear. Time to hire starts when the eventual hire entered the pipeline. In the example they are 44 and 27 days; the 17-day gap is sourcing and planning time.
For each filled role, count calendar days from the date the requisition was approved to the date the offer was accepted, then average across roles. Some organizations stop the clock at the start date instead; say which you use. The calculator shows both: 44 days to acceptance, 58 to the first day.
Benchmarks published by HR associations put the average for all roles at around six weeks, with hourly and high-volume roles filled in two to three weeks and senior or specialist roles taking three months or more. Compare like with like by role family and track your own trend; a falling time to fill with a stable quality of hire is the goal.
Daily pay × a multiplier for lost output and cover × days the seat is empty. $85,000 ÷ 365 × 1.5 × 58 days = $20,260 in the example. Use a multiplier near 1 for roles colleagues can cover and 2–3 for revenue-generating or bottleneck roles.
Offers accepted ÷ offers made: 4 ÷ 5 = 80% in the example. Track it by role and by reason for decline; pay, a slow process and a competing offer are the usual three, and each has a different fix.
(Value of the hires − cost of making them) ÷ cost. The calculator values each hire who is still employed after a year at a first-year figure you set ($60,000 in the example) and counts external spend plus internal recruiting cost: ($1,401,000 − $231,000) ÷ $231,000 = 506%.
The one with the lowest cost per retained hire, not the lowest cost per hire. In the example employee referrals cost $5,000 per hire who stays and the agency $22,500; job boards are cheap per hire ($5,500) but lose 30% within a year.
Add separation, vacancy, recruiting, onboarding and the productivity lost while the replacement ramps up. For a $65,000 employee the example comes to $28,249, 43% of salary; senior and specialist roles run much higher (81% in the specialist example). Multiply by annual leavers for the yearly cost: $1,016,947 for 200 people at 18%.
The ramp to full productivity. 5 months at 50% average productivity costs $13,542 for a $65,000 role, 48% of the total, and it never appears on an invoice. Faster, more structured onboarding reduces it directly.
Total cost ÷ participants, where total cost includes the participants' time: ($15,200 of time + $27,500 of program cost) ÷ 50 = $854. Leaving out the time understates the example by 36%.
(Annual benefit − total training cost) ÷ total training cost. With a $90,000 benefit against $42,700 the example returns 111% and pays back in 5.7 months. State what the benefit is made of; an unexplained benefit figure is the weak point of every training business case.
They are the four tabs of this page: time to hire and time to fill share a tab because they are two clocks on the same process; recruiting ROI works source by source; cost of turnover also replaces the old replacement cost page; training cost has its own tab. Their links open the right tab and each tab keeps its own saved history.
The figures and rules behind this calculator come from the publications below. Each link goes to the issuing agency, so you can check the current rate yourself.
U.S. Bureau of Labor Statistics — Monthly hires, quits and separations rates by industry
Results are estimates for planning and double-checking, not tax, legal or payroll advice. How we choose sources, how often rates are updated and how to report an error: editorial policy.
Average days in each stage (calendar days, per filled role)
Lost output and cover as a multiple of daily pay
Recruiting funnel for the same period (optional)
Time to fill (requisition approved → offer accepted)
44 days
time to hire 27 days (candidate applies → accepts) · seat filled after 58 days including notice · slowest stage: Interviews
Blue = before the hire entered the pipeline, green = counted in time to hire, gray = notice.
Vacancy cost per day
$349
$85,000 ÷ 365 × 1.5
Vacancy cost per role
$20,260
58 days empty
All 4 open roles
$81,041
Each day cut from the process
$1,397
across the open roles
| Funnel step | Candidates | Pass-through from previous step |
|---|---|---|
| Applicants | 240 | — |
| Passed screening | 48 | 20.0% |
| Interviewed | 16 | 33.3% |
| Offers made | 5 | 31.3% |
| Offers accepted | 4 | 80.0% |
Offer acceptance rate
80.0%
Applicants per hire
60
Interviews per hire
4
Selection rate
1.67%
hires ÷ applicants
Time to fill runs from requisition approval to offer acceptance and measures the whole process, including how long the job waited to be posted. Time to hire starts when the eventual hire entered the pipeline and measures how fast you move once you have the right person. The seat stays empty until the start date, so vacancy cost uses time to fill plus notice.