Free freelance pricing calculator 2026. Project quote builder with contingency, expenses, deposit and overrun check; consulting day rate and hourly rate from target income; retainer pricing with usage scenarios; profit and effective rate per client with revenue concentration; agency margin, markup and bill-rate multiplier.
Project quote: list the tasks or phases with hours and a rate for each, add pass-through expenses with any markup, a contingency for unknown scope, a discount, sales tax if the service is taxable, and the deposit. You get the quote total with a line-by-line breakdown, the deposit and balance, your effective hourly rate, and what that rate becomes if the hours overrun on a fixed price.
Day rate card: enter the income you want to pay yourself, annual business expenses, the profit margin to keep in the business, weeks off, billable days a week and billable hours on those days. You get the revenue you need and a consistent rate card: hourly, half day, day, week and average month, with the multiple of an equivalent employee wage.
Retainer: enter your standard rate, hours included, the discount for the commitment, the hours you expect the client to use and the overage rate. You get the monthly fee, the effective rate you earn at that usage, the break-even usage, and a table of what you earn per hour if the client uses half, all or one-and-a-half times the allowance.
Client profit: list each client with this month's revenue, hours, direct costs and whether it recurs, plus what an hour of delivery costs you and your monthly overhead. You get profit, margin and effective hourly rate per client, revenue concentration, the recurring share, and net profit.
Agency margin: enter the rate billed, what you pay per hour, hours billed, utilization and overhead. You get gross margin, markup, the bill-to-pay multiplier, net margin, and the bill rate or utilization needed for a target margin.
Links from the old project pricing, proposal price, quote, estimate, consultant fee, time value, retainer, profit per client, client profit, monthly revenue and agency margin calculators open the matching tab.
Freelance and agency pricing comes down to one figure seen from five directions: the rate you earn for an hour of work. A project quote sets it in advance and a fixed price exposes it to overruns. A rate card derives it from the income you need and the hours you can actually sell. A retainer trades a discount for predictability and lets it float with usage. Client profitability measures it after the fact, and agency margin is the same spread when someone else does the work. The calculator keeps each view on its own tab but uses the same definitions throughout, so an effective rate on the quote tab means the same thing as an effective rate on the client tab.
Labor $1,800 + $3,750 + $8,400 + $1,540 = $15,490; contingency 15% = $2,324; expenses $1,800 × 1.10 = $1,980; subtotal $19,794; discount 5% = $990; quote $18,804. Effective rate ($18,804 − $1,800) ÷ 116 = $146.58; at 139.2 hours $122.15.
($120,000 + $18,000) ÷ (1 − 15%) = $162,353. Billable time (52 − 6) × 4 = 184 days × 6.5 h = 1,196 hours. Hourly $135.75; day $882; week $3,529. Employee-equivalent wage $57.69, so the rate is 2.35× the wage.
At $135.75 an hour a minute is worth $2.26: a 20-minute unbilled call costs $45 and an hour of free "quick questions" a week costs $6,245 a year.
30 × $125 = $3,750; less 10% = $3,375 ($112.50 an hour). At 34 hours: $3,375 + 4 × $125 = $3,875, $113.97 an hour. At 15 hours $225.00; at 45 hours $116.67. Break-even 27 hours.
Acme (retainer): $4,000 − 28 h × $60 − $150 = $2,170 (54%, $137.50/h); Northwind (project): $6,500 − 62 h × $60 − $900 = $1,880 (29%, $90.32/h); Beacon (retainer): $2,200 − 26 h × $60 − $0 = $640 (29%, $84.62/h); Summit (hourly): $1,800 − 10 h × $60 − $0 = $1,200 (67%, $180.00/h). Contribution $5,890; overhead $1,500; net $4,390 (30%). Recurring 43%; largest client 45%.
Cost per billed hour $70 ÷ 80% = $87.50. Gross margin ($150 − $87.50) ÷ $150 = 41.7%; markup 71%; multiplier 2.14×. 320 hours: revenue $48,000, gross profit $20,000, net $10,400 (21.7%). For 50%: bill $175.00 or reach 93.3% utilization.
| Line | Basis | Amount |
|---|---|---|
| Discovery and strategy | 12 h × $150 | $1,800 |
| Design | 30 h × $125 | $3,750 |
| Development | 60 h × $140 | $8,400 |
| QA and launch | 14 h × $110 | $1,540 |
| Labor | 116 h at a blended $133.53 | $15,490 |
| Contingency | 15% of labor | +$2,324 |
| Expenses | $1,800 + 10% markup | +$1,980 |
| Discount | 5% of $19,794 | −$990 |
| Quote | deposit $7,522 (40%), balance $11,282 | $18,804 |
Effective rate $146.58 an hour. If the work takes 20% longer (139.2 hours) on a fixed price it falls to $122.15; the quote can absorb a 9.8% overrun before the effective rate drops below the $133.53 rate card.
| Client uses | Hours worked | Billed | Effective rate | vs. standard rate |
|---|---|---|---|---|
| 50% of allowance | 15 | $3,375 | $225.00 | +80% |
| 75% of allowance | 22.5 | $3,375 | $150.00 | +20% |
| 100% of allowance | 30 | $3,375 | $112.50 | −10% |
| 125% of allowance | 37.5 | $4,313 | $115.00 | −8% |
| 150% of allowance | 45 | $5,250 | $116.67 | −7% |
Overage is billed at $125 an hour. Break-even usage is 27 hours: below it the retainer pays more per hour than hourly billing would, above it the discount costs you. The fee is worth $40,500 a year before overage.
| Markup on cost | Gross margin | Bill rate as a multiple of cost | Bill rate on a $70 cost |
|---|---|---|---|
| 25% | 20.0% | 1.25× | $88 |
| 50% | 33.3% | 1.50× | $105 |
| 75% | 42.9% | 1.75× | $123 |
| 100% | 50.0% | 2.00× | $140 |
| 150% | 60.0% | 2.50× | $175 |
| 200% | 66.7% | 3.00× | $210 |
Margin = markup ÷ (1 + markup). The two are routinely confused: a 50% markup is a 33.3% margin, and a 50% margin needs a 100% markup. For employees, apply the markup to the cost of a billed hour (pay ÷ utilization), not to the pay rate.
The example scope is Discovery and strategy (12 hours at $150), Design (30 hours at $125), Development (60 hours at $140), QA and launch (14 hours at $110): 116 hours and $15,490 of labor at a blended $133.53. A 15% contingency adds $2,324 for the scope nobody can see yet, $1,800 of pass-through expenses go in at a 10% markup for the cost of buying and managing them, and a 5% discount comes off the lot: $18,804. With a 40% deposit the client pays $7,522 before work starts and $11,282 on delivery.
What matters is the rate you end up earning. Net of the expenses you paid for, the quote is worth $146.58 for each estimated hour, above the rate card because of the contingency. On a fixed price that premium is the entire safety margin: if the work takes 20% longer, 139.2 hours instead of 116, the effective rate is $122.15, and the quote can absorb only a 9.8% overrun before you are earning less than your own rate card. Remove the contingency and the same quote is $16,597 at $127.56 an hour with no cushion at all. Quote the contingency as a line or build it into the hours, but do not discount it away.
A consultant who wants to pay themselves $120,000, has $18,000 of business expenses and keeps a 15% margin in the business needs $162,353 of revenue. With 6 weeks off and 4 billable days a week at 6.5 hours, that revenue has to come from 184 days and 1,196 hours, 57% of an employee's 2,080-hour year. The rate card follows: $135.75 an hour, $441 a half day, $882 a day, $3,529 a week, $13,529 in an average month.
The same $120,000 as a salary is $57.69 an hour, so the consulting rate is 2.35 times the wage. Nothing about that is greedy: the consultant sells barely half the hours, pays for their own software, insurance and health cover, and as a self-employed person pays both the employer and employee halves of Social Security and Medicare, a combined 15.3% self-employment tax, of which the 12.4% Social Security part stops at the annual wage base. Billing five full days for fifty weeks would cut the rate to $81.18, but nobody who also has to find the work, invoice for it and take a vacation bills that much. Price from the hours you can really sell.
A retainer of 30 hours at a $125 standard rate is worth $3,750; a 10% discount for the commitment makes the fee $3,375, $112.50 for each included hour and $40,500 a year. What you actually earn per hour depends on usage. If the client uses the expected 34 hours, the 4 hours beyond the allowance are billed at $125 and the month comes to $3,875, $113.97 an hour.
The usage table shows the range. At half the allowance you work 15 hours for the same fee and earn $225.00 an hour; at one and a half times you work 45 hours and earn $116.67. The break-even is 27 hours: below it the retainer beats hourly billing, above it the discount is a cost you pay for a predictable month. Two terms decide which side you land on. Use-it-or-lose-it hours keep the discount honest, while unlimited rollover gives it back to the client. And overage should be billed at the standard rate or higher, never at the discounted one.
Revenue ranks clients one way and profit another. The example month bills $14,500 across 4 clients for 126 hours. Northwind (project) is the largest at $6,500 (45% of revenue) but takes 49% of the hours and $900 of direct costs, so its effective rate is $90.32 and its margin 29%. Summit (hourly) is the smallest account and the best one: $180.00 an hour and a 67% margin. Beacon (retainer) earns $84.62 an hour against a $60 cost of delivery, the first candidate for a price increase or a smaller scope.
Two portfolio figures matter as much as any single client. 43% of the month, $6,200, is retainer revenue that will be there next month; the rest has to be sold again. And one client at 45% of revenue means losing it would remove $6,500 of revenue, more than the month's entire net profit of $4,390 (30% after $1,500 of overhead). A common rule of thumb is to keep any single client below about 40% of revenue and to push the recurring share up over time; both make the business easier to plan and, eventually, to sell.
Billing $150 for work that costs $70 an hour looks like a 53.3% margin, and for a contractor paid only for billed hours it is. For an employee it is not: at 80% utilization every billed hour carries a quarter-hour of paid time nobody was billed for, so its real cost is $87.50 and the gross margin is 41.7%. On 320 billed hours that is $48,000 of revenue, $28,000 of delivery cost and $20,000 of gross profit; after overhead at 20% of revenue the net is $10,400, 21.7%.
To reach a 50% gross margin the bill rate has to be $175.00, or utilization has to rise to 93.3% at the current rate. Those are the only two levers on the delivery side, which is why agencies watch utilization as closely as rates. The markup table translates between the three ways the same spread is quoted: the example's 2.14× bill-to-pay multiplier becomes a 71% markup once unbilled time is counted in the cost of a billed hour, and a 41.7% margin.
Find answers to the most common questions about freelance pricing calculator.
Estimate hours by task, multiply by your rate, add a contingency for unknown scope and any expenses you will pay on the client's behalf, then check the effective hourly rate the total gives you. The example's 116 hours come to $18,804 and $146.58 an hour. On a fixed price, also check what you earn if the hours overrun.
Enough to cover the overrun you have actually experienced on similar work; 10–20% of labor is common, more when the scope is vague. In the example 15% contingency less a 5% discount leaves room for a 9.8% overrun before the effective rate falls below the rate card.
Hourly billing puts the risk of an overrun on the client; a fixed price puts it on you and should pay you for carrying it. If you quote a fixed price, the contingency is that payment. The calculator shows both sides: $146.58 an hour if the estimate holds, $122.15 if hours run 20% over.
Add the income you want to your business expenses, divide by one minus your profit margin to get the revenue needed, then divide by the days you can really bill. $162,353 ÷ 184 days = $882 in the example. A day rate is usually seven to eight times the hourly rate; here it is 6.5 billable hours at $135.75.
Because the freelancer sells only part of the year and pays costs an employer would. In the example the rate is 2.35 times the equivalent wage: only 57% of a full-time year is billable, expenses add $18,000, and the self-employed pay both halves of Social Security and Medicare (15.3%).
For a salaried person, annual income ÷ hours worked: $120,000 ÷ 2,080 = $57.69. For a self-employed person the relevant figure is the billable rate, $135.75 here, or $2.26 a minute, because every unbilled hour has to be recovered from a billed one.
Included hours × standard rate, less a discount for the commitment: 30 × $125 less 10% = $3,375. Set an overage rate at or above your standard rate and decide whether unused hours expire. Then check the effective rate at realistic usage: $113.97 at 34 hours in the example.
Usually nothing to 15%. The discount buys you predictable revenue and less selling, so it should be smaller than what that is worth to you. Watch the break-even: with a 10% discount the example retainer beats hourly billing only while the client uses fewer than 27 of the 30 hours.
Revenue minus the hours you spent at your cost of an hour, minus direct costs. For Northwind (project): $6,500 − 62 × $60 − $900 = $1,880, a 29% margin. Compare clients on effective rate, (revenue − direct costs) ÷ hours, which treats retainers, projects and hourly work alike.
There is no rule, but above roughly 40% the loss of that client would threaten the business; the example's largest client is 45%. A higher recurring share (43% here) and a wider client base both reduce the risk. Note that working mainly for one client can also raise worker-classification questions.
Agencies commonly aim for a gross margin on delivery of around 50% or more, which leaves a net margin in the 15–25% range after overhead; the right target depends on how much account management and sales the work needs. The example earns 41.7% gross and 21.7% net, and would need a $175.00 bill rate for 50%.
Markup is the spread as a share of cost; margin is the same spread as a share of price. Billing $150 on a cost of $87.50 is a 71% markup and a 41.7% margin. Margin = markup ÷ (1 + markup), so a 100% markup is a 50% margin.
They are the five tabs of this page: quotes, estimates and proposals share the project quote tab; consultant fees and the value of your time are the rate card; retainers, client profit (with monthly revenue mix) and agency margin each have a tab. Their links open the right tab and each tab keeps its own saved history.
The figures and rules behind this calculator come from the publications below. Each link goes to the issuing agency, so you can check the current rate yourself.
Internal Revenue Service — 15.3% combined rate, 92.35% net-earnings factor and the deductible half
Results are estimates for planning and double-checking, not tax, legal or payroll advice. How we choose sources, how often rates are updated and how to report an error: editorial policy.
Scope: tasks, hours and rate
Stock, licenses, subcontractors
For scope you cannot see yet
Quote total
$18,804
116 hours · deposit $7,522, balance $11,282 · effective rate $146.58 an hour against a blended $133.53
| Task | Hours | Amount |
|---|---|---|
| Discovery and strategy | 12 × $150 | $1,800 |
| Design | 30 × $125 | $3,750 |
| Development | 60 × $140 | $8,400 |
| QA and launch | 14 × $110 | $1,540 |
| Labor | $15,490 |
| Contingency (15%) | +$2,324 |
| Expenses (+10% markup) | +$1,980 |
| Discount (5%) | −$990 |
| Price | $18,804 |
Effective hourly rate
$146.58
price less expense cost ÷ hours
If hours run 20% over
$122.15
139.2 h on a fixed price
Overrun cushion
9.8%
before you earn less than your rate card
Deposit
$7,522
40% before work starts
Price = labor + contingency + expenses with markup − discount. On a fixed price the contingency is the only thing standing between an estimate that runs over and a pay cut: the cushion shows how far hours can overrun before your effective rate drops below the rate card. Most services are not subject to sales tax, but some states tax specific services; check before adding it.