Free financial ratio calculator for 2026: current and quick ratio, debt ratio, debt-to-equity, interest coverage, DSCR, ROA, ROE with DuPont, ROCE, asset and inventory turnover, DSO, DPO and the cash conversion cycle from one set of statement inputs.
Take the figures from one period: the income statement for the year (revenue, cost of goods sold, operating income, depreciation, interest, net income, principal repaid) and the balance sheet at the end of it (cash, securities, receivables, inventory, other current assets, total assets, current liabilities, payables, interest-bearing debt, total liabilities, equity).
Enter them once. All 23 ratios recalculate together; anything you leave at zero simply blanks the ratios that need it, and the calculator warns if assets, liabilities and equity do not balance.
Use the tabs to read one family at a time — liquidity, leverage and coverage, profitability, efficiency — or "All ratios". Each card shows the value, the formula and a rule-of-thumb range with a strong / acceptable / watch reading where one applies.
On the profitability tab, the DuPont line splits return on equity into net margin × asset turnover × equity multiplier, so you can see whether a high ROE comes from operations or from borrowing.
Links from the old ROE, ROA, debt ratio, current ratio, quick ratio, interest coverage and asset turnover pages open the matching tab here.
Ratios turn two statements into a handful of comparable numbers. Liquidity ratios compare what is due within a year with what can pay it. Leverage ratios compare borrowed money with assets, equity and earnings. Profitability ratios compare profit with the sales, assets and equity that produced it. Efficiency ratios measure how many times assets, inventory and receivables turn over, and the cash conversion cycle turns the last three into days. This page uses period-end balances; analysts often use the average of opening and closing balances for turnover and return ratios, which smooths growth. Use whichever you use consistently, and compare with your own prior periods before comparing with anyone else.
Income statement: revenue $2,400,000, COGS $1,320,000, EBIT $312,000, D&A $60,000, interest $48,000, net income $205,000, principal repaid $90,000. Balance sheet: cash $180,000, securities $40,000, receivables $260,000, inventory $310,000, other current $30,000, total assets $1,900,000, current liabilities $420,000 (payables $190,000), debt $650,000, total liabilities $1,050,000, equity $850,000. Results: Current ratio 1.95×; Quick (acid-test) ratio 1.14×; Cash ratio 0.52×; Working capital $400,000; Debt ratio 0.55×; Debt-to-equity 0.76×; Liabilities-to-equity 1.24×; Equity multiplier 2.24×; Interest coverage (TIE) 6.50×; Debt service coverage (DSCR) 2.70×; Net debt ÷ EBITDA 1.16×; Gross margin 45.0%; Operating margin 13.0%; Net margin 8.5%; Return on assets (ROA) 10.8%; Return on equity (ROE) 24.1%; Return on capital employed (ROCE) 21.1%; Asset turnover 1.26×; Inventory turnover 4.26×; Days inventory outstanding 86 days; Days sales outstanding (DSO) 40 days; Days payables outstanding (DPO) 53 days; Cash conversion cycle 73 days.
Current assets of $820,000 against $420,000 of current liabilities give a current ratio of 1.95×. Remove $310,000 of inventory and $30,000 of other current assets and the quick ratio is 1.14×: the business can still cover its bills without selling a unit. The cash ratio, 0.52×, is the strictest view.
EBIT $312,000 ÷ interest $48,000 = 6.50× times interest earned. Add back $60,000 of depreciation for EBITDA $372,000 and divide by interest plus $90,000 of principal ($138,000): DSCR 2.70×, above the 1.25 a bank typically requires. The stressed version falls to 1.26× coverage and 0.97× DSCR.
Inventory turnover 4.26× → 86 days of inventory. Receivables $260,000 ÷ revenue × 365 = 40 days. Payables $190,000 ÷ COGS × 365 = 53 days. Cash conversion cycle = DIO + DSO − DPO = 73 days: the business funds roughly that many days of operations before the cash comes back.
| Ratio | Formula | Rule of thumb | Why it matters |
|---|---|---|---|
| Current ratio | Current assets ÷ Current liabilities | 1.5 – 3.0 | Below 1 means current liabilities exceed current assets; far above 3 can mean idle cash or bloated inventory. |
| Quick (acid-test) ratio | (Cash + Securities + Receivables) ÷ Current liabilities | ≥ 1.0 | Leaves inventory out, so it shows whether bills can be paid without a sale. |
| Cash ratio | (Cash + Securities) ÷ Current liabilities | 0.5 – 1.0 | The strictest test; most healthy operating businesses sit well below 1. |
| Working capital | Current assets − Current liabilities | Positive | The dollar cushion behind the current ratio. |
| Debt ratio | Total liabilities ÷ Total assets | ≤ 0.5 | Share of assets financed by creditors; lenders get nervous above about 0.6. |
| Debt-to-equity | Total debt ÷ Shareholders' equity | ≤ 1.0 – 2.0 | Interest-bearing debt only; capital-heavy industries run higher. |
| Liabilities-to-equity | Total liabilities ÷ Shareholders' equity | Industry-dependent | Includes payables and accruals; useful alongside debt-to-equity. |
| Equity multiplier | Total assets ÷ Shareholders' equity | ≤ 2.0 – 3.0 | The leverage leg of the DuPont identity; 1.0 means no debt at all. |
| Interest coverage (TIE) | EBIT ÷ Interest expense | ≥ 3.0 | Times interest earned; below 1.5 the business cannot comfortably pay interest from operating profit. |
| Debt service coverage (DSCR) | EBITDA ÷ (Interest + Principal repayments) | ≥ 1.25 | What a bank tests on a term loan; most covenants sit at 1.20 – 1.35. |
| Net debt ÷ EBITDA | (Total debt − Cash − Securities) ÷ EBITDA | ≤ 2.5 – 3.0 | Years of EBITDA needed to clear net debt; above 4 is highly levered. |
| Gross margin | (Revenue − COGS) ÷ Revenue | Industry-dependent | See the Profit Margin Calculator for sector ranges. |
| Operating margin | EBIT ÷ Revenue | 10 – 20% | Profit from running the business before financing and tax. |
| Net margin | Net income ÷ Revenue | 5 – 15% | What the owners keep from each dollar of sales. |
| Return on assets (ROA) | Net income ÷ Total assets | ≥ 5% | How productively the whole asset base earns; asset-light businesses score higher. |
| Return on equity (ROE) | Net income ÷ Shareholders' equity | 15 – 20% | Owners' return; leverage inflates it, which DuPont makes visible. |
| Return on capital employed (ROCE) | EBIT ÷ (Total assets − Current liabilities) | ≥ 12 – 15% | Pre-tax return on long-term capital; compare with the cost of borrowing. |
| Asset turnover | Revenue ÷ Total assets | Industry-dependent (0.3 utilities – 3+ grocery) | Dollars of sales per dollar of assets; the second DuPont leg. |
| Inventory turnover | COGS ÷ Inventory | Industry-dependent (4 – 12 typical) | Times the stock sells through in a year. |
| Days inventory outstanding | 365 ÷ Inventory turnover | Industry-dependent | Average days a unit sits before it sells. |
| Days sales outstanding (DSO) | Receivables ÷ Revenue × 365 | 30 – 45 days on net-30 terms | Average collection time; compare with your payment terms. |
| Days payables outstanding (DPO) | Accounts payable ÷ COGS × 365 | 30 – 60 days | How long you take to pay suppliers; longer helps cash but strains relationships. |
| Cash conversion cycle | DIO + DSO − DPO | Shorter is better; negative is excellent | Days between paying for inventory and collecting the sale. |
| Ratio | Healthy | Stressed | What changed |
|---|---|---|---|
| Current ratio | 1.95× | 1.95× | Unchanged — the same current assets, so the ratio hides the problem |
| Quick ratio | 1.14× | 1.14× | Also unchanged: cash became receivables, which the quick ratio still counts |
| Cash ratio | 0.52× | 0.14× | This is where the cash drain shows |
| Debt ratio | 0.55× | 0.82× | Liabilities $1,050,000 → $1,550,000 |
| Debt-to-equity | 0.76× | 3.29× | Debt up, equity down |
| Interest coverage | 6.50× | 1.26× | Lower EBIT, higher interest |
| DSCR | 2.70× | 0.97× | Below the 1.25 most loan covenants require |
| Net margin | 8.5% | 1.7% | Net income $205,000 → $40,000 |
| ROE | 24.1% | 11.4% | Smaller profit on a much smaller equity base |
| DSO | 40 days | 64 days | Customers taking longer to pay |
| Cash conversion cycle | 73 days | 97 days | More days of cash tied up |
Every ratio answers one of four questions. Liquidity: can it pay the bills due this year? Leverage & coverage: how much is borrowed, and can earnings carry it? Profitability: what does it earn on sales, assets and equity? Efficiency: how hard do assets, inventory and receivables work? The default example — a $2,400,000 business with $1,900,000 of assets — answers them like this: current ratio 1.95× and quick ratio 1.14× (liquid); debt ratio 0.55×, debt-to-equity 0.76× and interest coverage 6.50× (moderately geared, interest well covered); net margin 8.5%, ROA 10.8% and ROE 24.1% (profitable); asset turnover 1.26×, inventory turnover 4.26× and a 73 days cash conversion cycle (reasonably efficient).
Read them in that order when something is wrong. A liquidity problem is urgent and visible in weeks; a leverage problem is a question of whether the business survives a bad year; profitability and efficiency problems are what you fix once the first two are stable. And read them as a set: the stressed version in the table above keeps a passable current ratio while its coverage ratios collapse, which is exactly the pattern a lender looks for.
Return on equity is the number owners care about, and the easiest one to flatter. The DuPont identity breaks it into three legs: net margin (profit per dollar of sales), asset turnover (sales per dollar of assets) and the equity multiplier (assets per dollar of equity, which is leverage). For the example, 8.5% × 1.26× × 2.24× = 24.1%.
The stressed company has a lower ROE (11.4%) despite an equity multiplier of 5.43×; had its profit held up, the extra leverage would have pushed ROE above the healthy version's — the same operating business reporting a higher owner return purely because it borrowed more. Two companies with the same ROE and different legs are different businesses: a grocer earns it through turnover, a software firm through margin, a bank through the multiplier.
A current ratio of 1.0 is alarming for a manufacturer and normal for a restaurant that sells for cash and pays suppliers on terms. A debt-to-equity of 2.0 is reckless for a consultancy and conservative for a utility. An asset turnover of 0.5 is poor for a retailer and excellent for a railroad. The calculator's readings use generalist ranges because they have to work for everyone; treat a "watch" as a prompt to look up your sector, not a verdict.
The most useful comparison is your own history: the same ratios for the last three to five periods, built from the same definitions, show direction. The second most useful is a public competitor's filings. Sector averages, such as the dataset NYU Stern publishes each year from company filings (linked in the sources), are the third.
Find answers to the most common questions about financial ratio calculator.
Between about 1.5 and 3.0 for most businesses: enough cover to pay the year's bills without hoarding cash or inventory. Below 1.0 means current liabilities exceed current assets. The example company sits at 1.95×. Cash businesses such as restaurants and grocers run lower comfortably; businesses with slow-moving inventory need more.
The quick (acid-test) ratio drops inventory and other less liquid current assets, so it asks whether the bills can be paid without a sale. The example is 1.95× current but 1.14× quick; a large gap between the two means liquidity depends on moving stock. A quick ratio of 1.0 or more is the usual yardstick.
Debt ratio (total liabilities ÷ total assets) below about 0.5 and debt-to-equity (interest-bearing debt ÷ equity) below 1.0 to 2.0 are generalist guides; the example is 0.55× and 0.76×. Capital-intensive industries and regulated utilities carry more; service businesses should carry less. Lenders also look at the equity multiplier (2.24× here) and net debt to EBITDA (1.16×).
Interest coverage (times interest earned) is EBIT ÷ interest expense: 6.50× in the example, where 3.0 or more is comfortable and under 1.5 is a warning. Debt service coverage goes further by dividing EBITDA by interest plus scheduled principal: 2.70× here. Banks write DSCR into loan covenants, typically at 1.20 to 1.35, because principal has to be paid too.
ROE of 15 to 20% and ROA of 5% or more are the usual yardsticks for established businesses; the example earns 24.1% and 10.8%. The gap between them is leverage: ROE = ROA × equity multiplier. Use the DuPont line on the profitability tab to see whether ROE comes from margin, turnover or borrowing.
A way of splitting ROE into net margin × asset turnover × equity multiplier. For the example: 8.5% × 1.26× × 2.24× = 24.1%. It shows which lever a business pulls — pricing, volume or debt — and why two companies with the same ROE can be very different risks.
Revenue ÷ total assets, 1.26× for the example. It varies more by industry than any other ratio: grocers and staffing firms exceed 3, manufacturers sit near 1, utilities and real estate below 0.5. Compare with peers and your own trend; a falling turnover with flat sales means assets are growing faster than the business.
Days inventory outstanding + days sales outstanding − days payables outstanding. The example: 86 days + 40 days − 53 days = 73 days. Shorter is better; a negative cycle (customers pay before suppliers are paid) is the holy grail of retail and subscription businesses.
Textbooks use the average of opening and closing balances for turnover and return ratios so that growth during the year does not distort them; this calculator uses period-end balances for simplicity and because small-business balance sheets rarely swing enough to matter. Either is fine if you do it the same way every period. Liquidity and leverage ratios are always point-in-time.
They are tabs on this page — profitability for ROE and ROA, leverage for debt ratio and interest coverage, liquidity for current and quick ratio, efficiency for asset turnover — and their links open the right tab. Entering the statements once gives you all of them, plus the ratios each old page lacked.
The figures and rules behind this calculator come from the publications below. Each link goes to the issuing agency, so you can check the current rate yourself.
NYU Stern School of Business — Return on equity, return on capital, debt ratios, margins and turnover by industry, updated each January from public filings
Results are estimates for planning and double-checking, not tax, legal or payroll advice. How we choose sources, how often rates are updated and how to report an error: editorial policy.
Enter the figures once from your income statement and balance sheet; every ratio updates together. Use the same period for both (year-end balances with the year's income statement). Leave anything you do not have at 0 and the ratios that need it show as —.
Income statement (period)
Added back for EBITDA
For debt service coverage
Assets (period end)
Liabilities & equity (period end)
Can it pay the bills due this year?
Current ratio
1.95×
Strong · rule of thumb 1.5 – 3.0
Quick (acid-test) ratio
1.14×
Strong · rule of thumb ≥ 1.0
Cash ratio
0.52×
Strong · rule of thumb 0.5 – 1.0
Working capital
$400,000
Acceptable · rule of thumb Positive
| Ratio | Formula | Value |
|---|---|---|
| Current ratio | Current assets ÷ Current liabilities | 1.95× |
| Quick (acid-test) ratio | (Cash + Securities + Receivables) ÷ Current liabilities | 1.14× |
| Cash ratio | (Cash + Securities) ÷ Current liabilities | 0.52× |
| Working capital | Current assets − Current liabilities | $400,000 |
How much is borrowed, and can earnings carry it?
Debt ratio
0.55×
Acceptable · rule of thumb ≤ 0.5
Debt-to-equity
0.76×
Strong · rule of thumb ≤ 1.0 – 2.0
Liabilities-to-equity
1.24×
rule of thumb Industry-dependent
Equity multiplier
2.24×
Acceptable · rule of thumb ≤ 2.0 – 3.0
Interest coverage (TIE)
6.50×
Strong · rule of thumb ≥ 3.0
Debt service coverage (DSCR)
2.70×
Strong · rule of thumb ≥ 1.25
Net debt ÷ EBITDA
1.16×
Strong · rule of thumb ≤ 2.5 – 3.0
| Ratio | Formula | Value |
|---|---|---|
| Debt ratio | Total liabilities ÷ Total assets | 0.55× |
| Debt-to-equity | Total debt ÷ Shareholders' equity | 0.76× |
| Liabilities-to-equity | Total liabilities ÷ Shareholders' equity | 1.24× |
| Equity multiplier | Total assets ÷ Shareholders' equity | 2.24× |
| Interest coverage (TIE) | EBIT ÷ Interest expense | 6.50× |
| Debt service coverage (DSCR) | EBITDA ÷ (Interest + Principal repayments) | 2.70× |
| Net debt ÷ EBITDA | (Total debt − Cash − Securities) ÷ EBITDA | 1.16× |
What does it earn on sales, assets and equity?
Gross margin
45.0%
rule of thumb Industry-dependent
Operating margin
13.0%
Acceptable · rule of thumb 10 – 20%
Net margin
8.5%
Acceptable · rule of thumb 5 – 15%
Return on assets (ROA)
10.8%
Strong · rule of thumb ≥ 5%
Return on equity (ROE)
24.1%
Strong · rule of thumb 15 – 20%
Return on capital employed (ROCE)
21.1%
Strong · rule of thumb ≥ 12 – 15%
DuPont decomposition of ROE
24.1% ROE = 8.5% net margin × 1.26× asset turnover × 2.24× equity multiplier
Which leg is doing the work? High ROE from the multiplier is leverage, not operating performance.
| Ratio | Formula | Value |
|---|---|---|
| Gross margin | (Revenue − COGS) ÷ Revenue | 45.0% |
| Operating margin | EBIT ÷ Revenue | 13.0% |
| Net margin | Net income ÷ Revenue | 8.5% |
| Return on assets (ROA) | Net income ÷ Total assets | 10.8% |
| Return on equity (ROE) | Net income ÷ Shareholders' equity | 24.1% |
| Return on capital employed (ROCE) | EBIT ÷ (Total assets − Current liabilities) | 21.1% |
How hard do assets, inventory and receivables work?
Asset turnover
1.26×
rule of thumb Industry-dependent (0.3 utilities – 3+ grocery)
Inventory turnover
4.26×
rule of thumb Industry-dependent (4 – 12 typical)
Days inventory outstanding
86 days
rule of thumb Industry-dependent
Days sales outstanding (DSO)
40 days
Strong · rule of thumb 30 – 45 days on net-30 terms
Days payables outstanding (DPO)
53 days
rule of thumb 30 – 60 days
Cash conversion cycle
73 days
Watch · rule of thumb Shorter is better; negative is excellent
| Ratio | Formula | Value |
|---|---|---|
| Asset turnover | Revenue ÷ Total assets | 1.26× |
| Inventory turnover | COGS ÷ Inventory | 4.26× |
| Days inventory outstanding | 365 ÷ Inventory turnover | 86 days |
| Days sales outstanding (DSO) | Receivables ÷ Revenue × 365 | 40 days |
| Days payables outstanding (DPO) | Accounts payable ÷ COGS × 365 | 53 days |
| Cash conversion cycle | DIO + DSO − DPO | 73 days |
Ranges are general rules of thumb, not industry statistics: a utility, a grocer and a software company all sit in different places. Compare with your own trend and with the sector averages linked in the sources below.